62 Anchor for fastening structural and non-structural elements • Suspended ceiling installations • Fire sprinkler systems • Suspension systems for pipes • Downpipes with rods • Ventilation systems and/or air ducts • Cable trays • Fixation of structural systems in non-cracked concrete with static or quasi-static loads • Fixing of redundant non-structural systems in cracked concrete or one-off applications in non-cracked concrete. APPLICATIONS HE PRODUCT HE-HO HE-A4 HE-CL HE-C4 HE-HC HE-NO HE-NS COATING/MATERIAL RANGE Atlantis C3-L coating: valid for dry indoor conditions (50 years) or in C3-type outdoor environments according to ISO 9223, for a period of 25 years. Zinc coating: suitable for use in dry indoor conditions (category C1 according to ISO 923), for a period of 50 years. THE PERFECT COATING ACCORDING TO THE EXPECTED LEVELS OF CORROSION A4 Stainless Steel: Suitable for indoor and outdoor applications, in coastal or industrial areas, areas exposed to high pollution levels and areas near roads. Inner thread. The first part of the anchor has an inner thread where the metric bolt and/or threaded bar is installed (bolts and bars not supplied with the product). The metric inner thread guarantees maximum versatility for use in multiple installations. Fins. The expansion of the cone causes the fins to expand, producing friction against the walls of the base material to enable fastening. Internal cone. The lower part of the anchor contains a cone that causes the fins to expand during installation. Protection. The plastic inside the anchor prevents the cone from falling during installation or transportation of the box. DESIGN AND GEOMETRY Version with HE-CL collar. The version with collar prevents the anchor from being introduced too far into the base material in cases where the bore hole has been made deeper than required by the documentation. Identification. The size of the anchor is punched onto the body to allow easy identification and to always know the required bore size and expansion tool. Short version HE-HC. The HE-HC version enables installation in areas where there are believed to be a lot of reinforcement trusses, such as the lower part of slabs. Given its short length (25 mm) it is not expected to interfere with the trusses. The range of drop-in expansion anchors with internal thread are designed for installing pipework, cable trays, ventilation ducts or fire sprinkler systems. They have European technical approval for structural applications in non-cracked concrete (in accordance with EAD 332023) and for the installation of redundant nonstructural systems in cracked concrete, including under conditions of fire exposure (in accordance with EAD 330747). Available with ATLANTIS C3-L, A4 stainless steel or zinc-plated coating for use in both indoor and outdoor applications. 100% INDEX MANUFACTURED This allows us to ensure a rigorous control of processes, guarantee the highest quality in our products, provide the best service and obtain a competitive global cost. QUALITIES AND ADVANTAGES REMOVABLE AND REUSABLE ANCHOR. The bolt or bar used can be removed, leaving a clear surface (the casing and cone remain inside the bore hole). The installed anchor can be reused. MAXIMUM GUARANTEES. PRODUCTS APPROVED ACCORDING TO THE HIGHEST QUALITY STANDARDS. • Approved (ETA 14/0135) for redundant non-structural systems in cracked and non-cracked concrete (C12/15 to C50/60), including under conditions of fire exposure. • Approved (ETA 14/0068) for structural applications in non-cracked concrete (C20/25 to C50/60). • FM Approval for use in fire sprinkler systems. • Confirmed suitability for the installation of sprinkler systems in accordance with the VdS CEA 4001 guidelines. EASY INSTALLATION. The EXP tool with rubber protector enables safe, controlled and ergonomic expansion of the anchor. How do I know if the anchor has been installed correctly? Once the sleeve has been inserted into the hole, hit with the expander until the upper edge of the sleeve is marked with some notches.
RkJQdWJsaXNoZXIy ODc2MDc=