56 VERSATILITY. MULTIPLE USES. Indicated for the installation of static or quasi-static loads in non-cracked concrete and reinforced concrete. Allows the disassembly of the anchor, unscrewing the screw or threaded element. • Structural fixings in non-cracked concrete. • Fixing of signs, shelves, panels, porticoes, railings, awnings, fence posts. • Urban furniture, cinema, theatre and stadium seats. • Cable trays • Doors • Façades • Temporary fixings APPLICATIONS CH GAMA Black zinc coating: suitable for use in dry indoor conditions (category C1 according to ISO 923), for a period of 50 years. Zinc coating: suitable for use in dry indoor conditions (category C1 according to ISO 923), for a period of 50 years. THE PERFECT COATING ACCORDING TO THE EXPECTED LEVELS OF CORROSION A2 Stainless Material: valid for indoor spaces with high frequency of condensation or outdoor environments not located near coastal or highly polluted areas. 1. Cone with anti-rotation fins fins prevents the anchor from turning, ensuring the expansion of the sleeve and facilitating its installation. 2. Sleeve opening. Optimizes the insertion of the cone and facilitates its expansion. 3. Practical information for the installation (diameter and length) stamped on the sleeve. 4. Design of the sleeve to ensure more efficient expansion. 5. Required depth mark to ensure proper performance. 6. Blue rubber with anti-rotation fins that facilitate installation. 7. Washer that increases the fixing surface. DESIGN AND GEOMETRY CH sleeve anchors are an ideal solution for the installation of structural elements in non-cracked concrete such as handrails, cable lines, street furniture or metal shelves. The geometry of the anchor guarantees a high load capacity, a high degree of safety and easy installation. When tightening the anchor, the cone is inserted into the expansion sleeve (without turning thanks to the anti-rotation), expanding it against the material to be fixed. The assortment of CH anchors consists of different head models depending on the required use. 100% INDEX MANUFACTURED This allows us to ensure a rigorous control of processes, guarantee the highest quality in our products, provide the best service and obtain a competitive global cost. QUALITIES AND ADVANTAGES ANTI-ROTATION GUARANTEE. FACILITATES INSTALLATION. The anchor consists of several anti-rotation elements (cone, sleeve and rubber) that prevent the anchor from turning at the start of the installation, facilitating installation and guaranteeing optimal expansion and performance. MAXIMUM GUARANTEES. APPROVED ACCORDING TO THE HIGHEST QUALITY STANDARDS. Approved (ETA 18/0018) for use in non-structural concrete. ANTI ROTATION PRODUCT CH-TO CH-A2 CH-8.8 CH-8.8 E CH-PL CH-PI CH-ES CH-INB CH-INN HEAD OF THE SCREW Hexagonal screw 6.8 A2 stainless steel hexagonal screw Hexagonal screw 8.8 Hexagonal head screw 8.8 for reduced thicknesses Flat head screw A2 Stainless steel flat head screw Projecting bolt Zinc-plated tamperproof head Black zinc-plated tamperproof head COATING/SCREW MATERIAL - - PRODUCT CH-GA CH-GE CH-GF CH-GF A2 CH-AR CH-AF CH-AF A2 HEAD OF THE SCREW Hook bolt Hook spiral Forged hook bolt A2 Stainless steel forged hook bolt Eye bolt Forged eye bolt A2 Stainless steel forged eye bolt COATING/SCREW MATERIAL - - - - - - - 1 2 3 4 5 6 7
RkJQdWJsaXNoZXIy ODc2MDc=