42 QUALITIES AND ADVANTAGES MAXIMUM VERSATILITY. VARIABLE ANCHOR DEPTH It can be installed with up to two different screwing depths in M8, M10, M12, M16* and M20* * In the MTH zinc-plated version MAXIMUM GUARANTEES. PRODUCTS APPROVED ACCORDING TO THE HIGHEST QUALITY STANDARDS. • Approval ETA 12/0397 option 1 for installation in cracked and non-cracked concrete (C20/25-C50/60). • Approval ETA 05/0242 option 7 for installation in non-cracked concrete (C20/25-C50/60). • Seismic approval C1&C2. • Approved for fire resistance R30-R120 in concrete. • Confirmed suitability for the installation of sprinkler systems in accordance with the VdS CEA 4001 guidelines. Shaft retracts as thread protection during anchor installation. Washer. It ensures optimal precision of the element being installed. It is supplied with a pre-assembled DIN 125 washer. Optionally, it can be supplied with DIN 9021 (wide series) or DIN 440 (for wood) washers. Nut. The internal threadingmakes it possible to fit the screw, facilitating the securing and connection of detachable elements. It is supplied pre-assembled. The lettering on the shaft indicates its length, letting you know the length of the anchor once installed. It is important to check the thickness to be fastened in order to properly choose the necessary anchor length. DESIGN AND GEOMETRY RANGE Atlantis C3-L coating: valid for dry indoor conditions (50 years) or in C3-type outdoor environments according to ISO 9223, for a period of 25 years. Zinc coating: suitable for use in dry indoor conditions (category C1 according to ISO 923), for a period of 50 years. MT THE PERFECT COATING ACCORDING TO THE EXPECTED LEVELS OF CORROSION A4 Stainless Steel: Suitable for indoor and outdoor applications, in coastal or industrial areas, areas exposed to high pollution levels and areas near roads. A2 Stainless Material: valid for indoor spaces with high frequency of condensation or outdoor environments not located near coastal or highly polluted areas. Marked with the installation depth. The line painted on the shaft marks the depth recommended by the approval to insert the anchor into the drill. Expansion clip and cone. The cone retracts, expanding the clip and exerting pressure on the base material to enable fastening. Shaft edge. It allows the clip to be held in position during installation. Identification. Model andmeasurement indicated on the clip. • Structural applications • Structural beams and columns • Stadium seats • Wood-to-concrete structures • Railings and fencing • Shelving and racks • Structural beams and columns • Fasting of non-structural elements like signs, machines, boilers, posters, billboards, etc. • Other installations APPLICATIONS 100% INDEX MANUFACTURED This allows us to ensure a rigorous control of processes, guarantee the highest qual i ty in our products , provide the best service and obtain a competitive global cost. The male anchors are an effective professional solution for installing elements with high performance guarantees in cracked and non-cracked concrete. They are available in a wide range that includes, among others, anchors with European ETA 12/0397 approval for use in cracked and non-cracked concrete, C1&C2 seismic approval for fire resistance, and European ETA 05/0242 approval for use in non-cracked concrete. They are suitable for installation in both indoor and outdoor applications thanks to the coating options (ATLANTIS C3-L and zinc-plated) and materials available (A2 stainless, A4 stainless and steel). PRODUCT MTP MTP-A4 MTP-X MTP-AT MTP-G MTH MTH-AT MTH-A4 MTH-A2 MTA AXIS CLIP
RkJQdWJsaXNoZXIy ODc2MDc=